Home > 5VZ Swap Parts > 5VZ Fuse Box Cable Extension
Alternative Views:	Our Price: $74.99 Product Code: 571511 Select your Recipient Vehicle Model*: Please Select 4Runner / Pickup T-100 Part Currently Unavailable

Description Install Instructions   5VZ Fuse Box Cable Extension This extension consists of an 8ga cable and a pre-installed fusible link wire section. It is for use when re-locating the battery to the LH side of the engine bay in an ’84-’95 Toyota 4Runner/Pickup or T100. It will safely make the main connection from the original fuse box to the battery positive terminal. Fuse Box Cable Extension The Fuse Box Cable Extension is used to connect the main fuse box positive cable to the battery, after the battery is re-located to the LH side. The original fuse box will remain in its original position. Cut the original fuse box positive cable (originally connected to battery positive terminal) about 3” from the original eyelet. The ‘fusible link’ section should now be removed and the remaining cable core should be approximately the same size as the cable core. Making a high quality connection and seal, splice the original fuse box cable to the cut end of the extension cable. Route the Fuse Box Cable Extension to the battery positive terminal. We recommend following and securing to the headlamp harness, in front of the radiator. Connect the fuse box power cable and all other positive battery connections to battery positive terminal. Check over your installation to be sure the battery harness is not rubbing against any sharp edges or moving parts.

Share your knowledge of this product. Be the first to write a review »