Cross Member/ Belly Skid Plate
Cross Member/ Belly Skid Plate Single T Case
Transmission cross member and skid plate. Our motor mounts do require either a modification of the transmission cross member as the tranny is located approximately 1″ back from its stock location or you can use the factory transmission isolator and a new cross member that accepts the factory isolator. No modification or fuss! Our cross members and skid plates are designed, machined, and made right here in the USA. This is the transmission cross member you will want when using our motor mounts! This cross member is lifted 1″ over a stock Toyota cross member and includes a belly skid plate. Slight skid modification is necessary on IFS rigs that retain the front sway bar.