Home > 5VZ Swap Parts > 5VZ Swap Battery Relocation Tray
Alternative Views:	Our Price: $152.99 Product Code: 571510 Part Currently Unavailable

Description Install Instructions   5VZ Swap Battery Relocation Tray The Battery Relocation Tray is intended for engine swaps in 84-95 Toyota Pickups and 4Runners, when the battery is re-located to the LH side of the engine bay. It is tailored to fit in the fender area just behind the headlight and coolant over-flow tank, and provides a safe surface for mounting the battery. This tray is designed to bolt-on, using holes that will need to be drilled in the fender area. The full tray provides a tie-down for the battery. The tray is constructed from 14ga mild steel and comes un-painted. Battery Relocation Tray This tray is delivered un-painted and is constructed of mild steel. We recommend painting this tray prior to installation. Remove the washer bottle and any other restrictions in LH front corner of the engine bay. Set the Battery Relocation Tray in this corner. Using the washer bottle (will be used in it’s stock location) and battery as a guide, find the best location to install the tray. Also be sure to verify hood clearance to the top of the battery. Clamp the tray into place. Using the bolt holes in the tray as a guide, mark the location for holes to be drilled in the fender-well. There will be 1 hole in the rear upper corner, 2 in the front side, and 2-3 in the fender below the tray. Remove the tray and drill the mounting holes in the fender-well. Bolt the tray in place using the provided hardware. Suggested with your Install 5VZ Fuse Box Cable Extension Our Price: $74.99 Add to Cart

Share your knowledge of this product. Be the first to write a review »